Hydraulic lift storage bed kits are meant to be put together by the consumer. This means that they usually come with instructions and the necessary tools are minimal and common, such as hammer and screwdrivers. The bed cabinet will add wall rails, so look up the rules in the area with a control detector and mark them. Remove the base card trim so that the wall is being faced by the cabinet. You return it and can later trim the base board.
Fit the cabinet like your hydraulic lift storage bed. Some bets are for building the cabinet components, and some do not. The assembly will look like any furniture modules you have put together if you choose one with a cabinet included. If you’re crazy about carpentry, you can choose to build the cabinet yourself. To mount and attach the bed panel, or your piece of mattress comes fast, you probably need a partner to raise the bed panel and hold the lifting machine in place when attaching the bed panel. Use a lever like a PVC tube to move the lifting machine to make it easier and reduce the possibility of damage. When attached, let it close the bed panel. Check the gap around the bed panel to see it match on both sides, until it is, and shim in the bottom of the cabinet.