Apply liquid déclassé to the wood panel bedroom, by means of a cloth. Many liquid declassing solutions work almost immediately. And you can wipe déclassé merely a few seconds after application. The sealant is applied paneled wood is hard to paint over and Sanding this topcoat could damage the panels. Liquid déclassé removes both glossy and matte panel’s sealants without any complications. After that, spot-prime the nail and staple marks with rust-inhibiting primer and a synthetic-bristle brush. Rust-inhibiting primer will insure any lingering rust discoloration. And also it prevents future rust deposits from seeping through the paint. Wait at least two hours for the primer to start drying.
Prime the whole bedroom wall surface with an all-round inner primer. Use a medium-nap roller on the main wood panel bedroom surfaces and a synthetic brush for edges. Please wait 24 hours for the primer to dry and cure. Paint wood panel bedroom walls with flat latex paint. Medium-nap rollers make short work of large areas, while synthetic-bristle brushes are useful on edges and corners. Remove the painter tape and plastic plates after 24 hours.
Wood panel bedroom – To paint a rusty wood panel bedroom, starting with scrub rusty patches with a scouring pad. Do not scrub too aggressively. Wanted to knock off loose rust without scratching up panels. If rust does not come alone, Force it. Next, sand the remaining rust with 300-grit sandpaper. This fine sandpaper buffs off any remaining rust stains that did not come loose from the scouring pad. Clean bedroom panels with disodium phosphate and a sponge.