Vinyl ladder rungs are linings that are normally glued to the top of the ladder. Installing vinyl stair tread covers provides a better grip that will minimize slips and falls. The treads will also help prolong the life of the ladder. They can be used in residential or commercial places. Measure the width and depth of each step on the ladder. Each staircase could be a different measure, so measure it carefully. Pay attention to whether the stairs have a nose or not, because if there is a nose, that the measurement should be added so that the tread is adjusted correctly. Select the footprint of the staircase. Align rungs on the ladder so that they center, and make a mark on the edges so that the tread can be easily aligned after the adhesive has been applied.
Remove the treads and apply adhesive footprint to the ladder. The adhesive must bond to rubber or plastic, as well as wood or metal. Carefully place the ladder rungs back into position as aligned with the marks of stage 3. Allow the adhesive to dry for at least 24 hours, or the recommended drying time for the adhesive used, before using the ladder.
Tips and warnings Measure before buying stairs rungs so the right size can be purchased. If there is a nose on the ladder, the same procedure can not only will the tread be more needed to cover the stairs correctly. Be careful when working with the adhesive, because plastic adhesives are difficult to remove from surfaces.